Apex Medical SB200 User Manual download pdf (Page 7)

English

5. Operation

Open up battery compartment cover carefully and then install two

“AAA” Alkaline batteries according to the (+/-) polarity.

Press the “power switch” key for 1 second to activate the device.

Information of version appears on the screen. The device is then in

the “self-test” mode with the software version shown. The

measurement starts at the completion of the “self-test.”

The pulse bar with “-“ icon on the screen up and down means the

measurement result will be ready soon.

The readings of oxygen saturation, pulse rate, and pulse strength

will appear on screen in 8 seconds average. The readings will

appear on the screen for 8 seconds after measurement. Pressing

“power switch” is to change the viewing direction. While SpO

exceeds the Min. threshold(90); the device will sound the alarm with

two beeps and alarm icon flickering. If the measurement fails,

the icon “- -“ will appear on screen.

The device will turn itself off automatically after 8-second idling.

While the battery power is low, the battery indicator icon will flash

twice per second. Please replace the batteries as soon as possible

or the device will be off automatically in 30 seconds.

1 2 3 4 5 6 7 8 9 10 11 12 ... 56 57

No comments

Apex Medical SB200 User Manual Page 7